Between the last post and today I tidied up the (temporary) rigging using the blocks. Here are a couple of photos showing a bit of detail.
The model weighs about 30kg and the trolley adds another 5kg so the whole package is more than I can lift for transporation. I had to build a ramp.
Tally Ho was loaded up and taken to the water. This short video shows what happened - I was by myself and working the camera and RC transmitter was difficult hence the limited video. Thanks to my friend Paul for editing the sky and beach out of the raw video.
I was pleased with this first outing despite the very light wind (almost none). Several things need tweaking:
Ballast needs adjusting, she is sailing down at the bow.
Not much rudder control at low speed under sail made changing tack difficult. Maybe
make rudder a bit bigger?
Foresail sheets need to work better. The number 2 is often on the wrong
side of the forestay. More wind would fix that.
She wants to round up into the wind. Could this be a result of being down
at the bow?
Awesome
ReplyDelete